|
Post by fasturbo on Jan 29, 2007 13:40:16 GMT -6
Hi,
I have a suggestion to make your Pro Wheel Mandrel even better. Add a collar to the kit to go over the outside of the hub.
Here is what I did; I took a 1/4-20 hex nut and drilled it out with a 0.275" drill bit. This eliminated the threads and provided a nice collar to place over the hub. This allowed us to tighten the thumb screw without worry of damaging the wheel. We were having problems with the thumb screw expanding the bore or being too loose on the mandrel.
With the collar we could tighten the wheel and get it located perfectly the first time, every time.
|
|