|
Post by xxbowhunterx on Jan 2, 2013 14:29:20 GMT -6
my question is? I am building a rail rider. I have the rail rider tools. do I use the tools before I polish the axles? because if i use the rail rider tool before I polish the axles they won't spin true in the drill. If I Polish first wont the tool damage the axle and ruin the polish? thanks for your help.
|
|
|
Post by RacerX on Jan 2, 2013 17:41:52 GMT -6
You will be fine bending your axles after polishing them, the contact points are small and if used correctly have very little pressure. If you are concerned, use a piece of masking tape (clean with denatured alcohol) of a strip of a thin business card. A strip of a thick business card will add .5 deg more bend if needed.
Hope this helps.
Racer X
|
|