psycaz
Addicted to Speed
Posts: 86
|
Post by psycaz on Oct 20, 2005 16:58:23 GMT -6
I am going to be doing a bunch of wheels and need to get extra sandpaper to use with the Pro Hub tool. Anyone know what grits they recommend to use? TIA
|
|
|
Post by patmanruls on Oct 20, 2005 17:46:05 GMT -6
I start with a 180 grit, then go to 320, then 600, and use 1000 last. If you're using graphite, I would recommend that you HEAVILY rub this area with graphite. I use patches for cleaning your gun and soak the patches in the graphite, then run it into the plastic as best you can.
|
|
psycaz
Addicted to Speed
Posts: 86
|
Post by psycaz on Oct 21, 2005 5:06:52 GMT -6
Thanks for the help
|
|
|
Post by RacerX on Oct 21, 2005 5:58:55 GMT -6
220 & 600 is what we supply with the tool to start.
The 220 cuts well to remove material and the 600 wet finishes nicely, of course 800 & 1000 will make it even better.
Race Fast
Racer X Derby Worx, Inc.
|
|