|
Post by 2boybarians on Mar 15, 2007 11:31:24 GMT -6
This is a basic question but.... we have hollowed out the car in the back and infront of the rear axle slot, how should we attach these tungsten cubes. We also have some tungsten plates that we want to put under the rear axle. Thanks for your advice
|
|
|
Post by Lucky 13 on Mar 15, 2007 12:09:43 GMT -6
I use either 5 minute epoxy or super glue gel. Hope that helps!!
Lucky 13
|
|
|
Post by SpeedGeek on Mar 15, 2007 18:12:52 GMT -6
Warp Speed clued me in to Devcon 5 minute Epoxy last year.
It's good for almost anything that needs bonding or even filling and building.
It really does set in 5 minutes unlike other "5 minute" epoxies that take hours to set hard. Don't buy any other brand of epoxy.
It's really great stuff'; it deserves its own spot right next to the Bondo.
|
|
|
Post by 2boybarians on Mar 17, 2007 6:06:59 GMT -6
Thank you both for your advice, we really do appreciate the help !!!!!!!!
|
|