khouse
Head in the Pine
Posts: 199
|
Post by khouse on Jul 4, 2008 16:50:53 GMT -6
Does anyone have a good place to purchase reamers for the axle bores? I decided to turn my own wheels. Well at least I'm going to try!
Also is there any way to get email notification to responses on this forum?
|
|
beakerboysracing
Head in the Pine
You can pick your friends, you can pick your nose, but you can't flick your friends across the room.
Posts: 167
|
Post by beakerboysracing on Jul 4, 2008 19:04:12 GMT -6
Khouse,
Don't know about reamers, I just buy Derbyworx wheels already prepped. Just need a little clean up and they are ready to go.
About e mail notification, log into the board and click on the link for your pm either at top right or bottom right of home page. Look top right of pm page and you will see preferences. Click on that and the rest is self explanitory.
See ya
Scott
Beakerboys
|
|
|
|
Post by slkrnsntracing on Jul 5, 2008 7:10:18 GMT -6
About e mail notification, log into the board and click on the link for your pm either at top right or bottom right of home page. Look top right of pm page and you will see preferences. Click on that and the rest is self explanitory. See ya Scott Beakerboys Scott, Thanks for the explanation. I had mine set up to send me email notifications, but I got a virus and had to get my computer cleaned up. Since then I hadn't been able to figure how to get notifications again, so thanks for posting it. Good luck at the races this afternoon. Phil |
|
khouse
Head in the Pine
Posts: 199
|
Post by khouse on Jul 5, 2008 8:44:54 GMT -6
Beakerboys,
I went to the preferences and it appears that the notification is for private messages only. Is there another place to set up notifications for the forums?
|
|
beakerboysracing
Head in the Pine
You can pick your friends, you can pick your nose, but you can't flick your friends across the room.
Posts: 167
|
Post by beakerboysracing on Jul 5, 2008 15:20:12 GMT -6
Go to your profile and click on BOOKMARKS. Click on link that says bookmark preferences and you can chose pm or email notification
See Ya
Scott
|
|
|
|
Post by Barga Racing on Jul 5, 2008 16:15:42 GMT -6
Does anyone have a good place to purchase reamers for the axle bores? MSC industrial supply or McMaster-Carr Either place you can get about any size reamer you want as well as hss or carbide. If I remember correctly I got mine from McMaster-Carr. Good Luck. |
|
khouse
Head in the Pine
Posts: 199
|
Post by khouse on Jul 5, 2008 17:47:05 GMT -6
Barga,
I have a MSC book right here. I think I'll have a look! Thanks.
|
|
khouse
Head in the Pine
Posts: 199
|
Post by khouse on Jul 5, 2008 17:50:02 GMT -6
Beakerboys,
The BOOKMARK thing worked fine. Thanks for the tip!
|
|
