Jay
Newbie
Posts: 2 
|
Post by Jay on Dec 10, 2008 19:16:31 GMT -6
Do you guys use a different COM based on the length of track? Last year we used a 32 footer and this year will be using a 42'. From my understanding I would want to use a less agressive COM.
|
|
|
|
Post by Lucky 13 on Dec 10, 2008 20:35:34 GMT -6
Do you guys use a different COM based on the length of track? Last year we used a 32 footer and this year will be using a 42'. From my understanding I would want to use a less aggressive COM. Normally you would want a more aggressive com on a longer track, but a lot depends on the track type and condition of the track you are running on. What type track will you be racing on ? Lucky 13 |
|
|
|
Post by srcracing on Dec 10, 2008 21:59:59 GMT -6
well on aluminum tracks i shoot for 7/16 com but usually end up with 1/2" COM, but if the track has some imperfections like a little rougher surface then probably keep COM around 3/4" to 1" just my 2 cents...steve
|
|
Jay
Newbie
Posts: 2
|
Post by Jay on Dec 11, 2008 10:53:59 GMT -6
last years track was a homemade wooden (very rough guides). This year we are borrowing an aluminum track from a neighboring pack and dont know the maker. It seems good and smooth but I have not checked from less than 5 foot.(Yet)
|
|
