|
Post by pinecarkilla on Jan 23, 2009 11:21:58 GMT -6
Hey all, how do you gap your wheels when using canted axles, or what is recommended when installing your wheels. I have a hard shim to gap with,(works fine for straight axles), just wondering if I should use the old business cards, or maybe some recommendations on what works best, and what clearance is recommended for cambered wheels?
|
|
|
Post by Lucky 13 on Jan 24, 2009 1:49:54 GMT -6
Hey all, how do you gap your wheels when using canted axles, or what is recommended when installing your wheels. I have a hard shim to gap with,(works fine for straight axles), just wondering if I should use the old business cards, or maybe some recommendations on what works best, and what clearance is recommended for cambered wheels? Pinecarkilla, Welcome to the Derby Worx forum !! Since I started using the Rail Rider Tool, I have inserted the axles right up to the mark where the bend starts or just before it with very good results. Lucky 13
|
|
|
Post by pinecarkilla on Jan 24, 2009 6:54:22 GMT -6
Thanks Lucky, I will give it a try.
|
|