tkp
Pine Head
Posts: 65
|
Post by tkp on Apr 14, 2010 19:42:01 GMT -6
In pack we raced on 42 foot track and son's com was roughly 3/4.
In district we will race on 32 foot aluminum- I'm assuming due to shorter track we would need to have the com say 1-1.25 in order to be quicker down the hill and also enough momentum to finish a quicker race?
Essentially looking to see what would be optimal com on a shorter track. If 2 cars are built exactly the same- which com configuration would produce a faster car on a 32 ft track- 1) 3/4 com or 2) 1.25 com or 3) no difference
thanks gents...
|
|
|
Post by azgreg on Apr 14, 2010 20:36:07 GMT -6
I'd leave it right where it is.
|
|
|
Post by Lucky 13 on Apr 14, 2010 22:28:33 GMT -6
I agree with Azgreg. I would stick with the 3/4 com !!
Lucky 13
|
|
tkp
Pine Head
Posts: 65
|
Post by tkp on Apr 15, 2010 9:07:49 GMT -6
Thanks Gents!
|
|
Art Racing
Pine Head
Life's a hole dig it!
Posts: 57
|
Post by Art Racing on Apr 15, 2010 13:05:23 GMT -6
I agree with azgreg and lucky 3/4 is good I think less than that would be a little faster if you had time to tune on it but if not then just lube and race.
|
|